Mustek PP3000 User Manual download pdf (Page 25)

3 - 5

PST-7000 series user’s manual – INSTALLATION GUIDES

monitor backward 90° to have the monitor sit on the bowl mounted on top of main

unit. On completion of this maneuver the rear of the monitor will “click” into position

over the monitor hook and will be securely retained into position.

Fig. 3 - 2 Mounting monitor

The next step is to pass the monitor cable(s) through a square hole at the back

edge of main unit. Open the back door by sliding two back door latches (ref. Fig. 2-5)

at the bottom of back door toward the center. The back door is easily removable.

Remove the cable cover by pulling the latch on the underside of the cable cover (ref.

Fig. 3-3). Connect the VGA cable (and the AC cable to the AC outlet above the

socket for AC inlet if an AC type CRT such as the color monitor is delivered in stead

of DC type) to the VGA connector. This connector may be marked as “display”.

Secure the two hex screws on the display connector. Put the cable cover back onto the

square hole with the hook end in position first and then press the cover down to

position. You will hear another click sound and the cable cover is well mounted.

MONITOR

HOOK

MOUNTING LUGS

MOUNTING HOLES

BOWL

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 66 67

No comments

Mustek PP3000 User Manual Page 25