Mustek PP3000 User Manual download pdf (Page 24)

3 - 4

PST-7000 series user’s manual – BRIEF INTRODUCTION

PUTTING IN UPS BATTERY

First remove the CD-ROM platform if this option is installed. Remove the

battery cover first by pressing down at one end and pushing out the battery cover as

shown. The user may find the UPS battery lying in the battery compartment if this

option is ordered. Connect the cable through the opening on the wall toward the rear

room of the cabinet and through the bottom of the rear room to the connector in the

bottom chassis as described in the previous paragraph. The Velcro strips in the

accessories kit may be used to firmly anchor the UPS battery into position.

L1L1

L0L0

LPLP

L2L2

L3L3

L4L4

Fig. 3 - 1 Removal of battery cover

MONITOR

Upon receiving the CRT type PST7000, the monitor comes in a separate box.

The installation of the monitor onto the PST product is as following. First take both

the main unit and the monitor out of their boxes. Hold the monitor with the screen

facing downward allowing the two mounting holes at the bottom toward the two

mounting lugs on the bowl at the top of the PST main unit (ref. Fig. 3-2). Let the two

mounting lugs insert into the two mounting holes, then gently push and rotate the

PRINTER

PLATFORM

DISPLAY

PLATFORM

OPENING TO

REAR ROOM

BATTERY

COVER

PRESS THIS END

DOWN AND

PUSH THIS

WAY TO OPEN

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 66 67

No comments

Mustek PP3000 User Manual Page 24