Mustek PP7000-II Specifications Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 69
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
TP-5700/5800 series Technical Manual 4 - 4
SERIAL PORT COM2/3/4
PIN ASSIGNMENT OF 9 PIN D SUB MALE CONNECTOR:
PIN #
DEFINITION
ALTERNATIVE
DEFAULT SETTING
1 DCD
2
RX
3
TX
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI +5 VDC RI
IRQ 3 is assigned for COM2, IRQ9 is assigned for COM3, IRQ5 is
assigned for COM4. All can be changed in CMOS setup.
Port COM2 is mostly suggested when a modem is to be connected.
DC supply to these ports is UPS supported.
Jumper selection: please refer to the description in Hardware details of
this manual.
ATA IDE CD ROM CONNECTOR (for
TP5815)
l This port is a Half Pitch Centronics 36 F connector. The pin assignment
in this connector is proprietary. However, Vcc is supplied through pins
10, 11, 31; +12V DC is supplied through pins 14, 29, 32, 33 and Gnd is
connected at pins 19, 28, 30, 34.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 68 69

Comments to this Manuals

No comments