Mustek GSmart 350 User Manual download pdf (Page 13)

Helpful Hints

10

Issue Cause Solution

No power. 1. Batteries not loaded correctly.

2. Dead batteries.

1. Re-install batteries.

2. Replace batteries.

Power

Sudden power

failure.

1. Low battery power.

2. Auto Power Off function

engaged.

1. Replace batteries.

2. Turn Power On.

No capture when

shutter is depressed.

1. Camera not in View mode.

2. BUSY icon appears.

3. Memory is full.

4. Flash is charging.

1. Set camera to View mode.

2. Wait for camera to re-adjust.

3. Delete images in camera’s memory.

4. Wait for flash icon to stop blinking on OSD.

Flash does not work. 1. Flash is set to OFF.

2. USB is connected to the camera.

3. Environment is bright enough.

1. Set flash to AUTO in RECORD of OSD.

2. Disconnect the USB cable.

3. Continue capturing images.

Capture Images

Image is too bright

Or too dark.

1.Exposure(EXP) setting is

unsuitable.

1. Adjust EXP(exposure) setting while capturing

images with up/down arrows Or change EXP

setting in RECORD category of OSD.

USB

Device not ready

Or

Connection failure.

1. Camera is not powered on.

2. USB not connected properly.

3. USB data transfer error.

4. Hardware compatibility problem.

5. Insufficient USB power

1. Power on the camera.

2. Ensure USB cable is connected.

3. Unplug and reconnect the USB cable.

4. Contact your computer vendor for help.

5. Ensure USB connects directly to computer

host port, NOT keyboard or other port.

Transfer

Cannot transfer data.

1. Incorrect cable connection.

2. Camera is not turned on.

1. Reconnect the cables.

2. Turn on the camera.

Delete

CF Card error. 1. CF Card may not be formatted. 1. Format card through the OSD function.

Note: You will delete all data on the CF Card if

you reformat your CF Card.

11

1 2 ... 8 9 10 11 12 13

Comments to this Manuals

No comments