Mustek PageExpress A620 User Manual download pdf (Page 14)

• To get high image quality and good recognition results, please

perform step 1, 2, 3 in that order prior to use if necessary.

• Make sure the cleaning and calibration paper, and cleaning stick are

clean without any dust before use.

• Do not use any solvent to clean the sensor.

1. Put your thumbs in the feed slot and pull the feed slot cover upwards

to remove it from the scanner.

2. Insert the thin end of the cleaning stick into the slot of the scanner at

the rear side. Move the stick from one side to the other slightly a few

times, then remove it.

Rear side

Cleaning stick

Step 2: Using the cleaning stick

Insert the supplied cleaning paper into the feed slot of the scanner,

then press SCAN

(

SCAN

)

button to rolled through and scanned.

Step 1: Using the cleaning paper

Note: Do not insert the cleaning stick into the feed slot at the front side

of the scanner as this may damage the internal component.

Front side

Cleaning paper

Cleaning and Calibrating the

Scanner

1 2 ... 9 10 11 12 13 14 15 16

No comments

Mustek PageExpress A620 User Manual Page 14