Mustek PL407 User Manual

Portable DVD PL407 seriesDEC. 2006DPC-7100 series OSDPC71001

- 6 - without damage.  The battery pack shall return to normal operation only after the fault has been removed.  A thermal fuse must be added on

- 7 - 4 Dimension & Physical Characteristics 4.1 Outline Dimension  212mm(L) x 158mm(W) x 29.8mm(H) 4.2 Physical Characteristics

- 8 - 4.3 IM Drawing  Disc Cover & Top bezel module

- 9 -  Mecha & Top bezel module

- 10 -  Base & engine module

- 11 -  Up-case & LCD panel module, full set structure

- 12 - 5 Regulatory Standards 5.1 Safety  ETL  TUV-GS  LVD  CB 5.2 EMI  CE  FCC 5.3 Ergonomics  Dolby  Macrovision

- 13 - 6 Trouble Shooting 6.1 Error Code Table CODE Descriptions of Error Note Power Test T01 No power no action T02 Power Led indicator is not

- 14 - T33 MP3 abnormal sound T34 Audio no waveform (sound) or waveform (sound) abnormal Earphone Test T41 Earphone no sound or the sound has

- 15 - B. Measure pin 168 on U201 to see if the voltage is high. C. Measure R903 to see if the voltage is highand the negative end of D901 must be

No.: Revision: 1.1 Date: Service Manual for Portable DVD

- 16 - C. Check the resistors or capacitors of J601, U301, or U201 on the main board, or those adjacent to IC to see if there is any hollow solderin

- 17 - replace the main board.  T13Disc drive scratches disc  Main Board A. Check the resistors or capacitors of J601 or U601 on the main board

- 18 - correctly plugged to the fixed positions, or re-plug them. B. Check the resistors or resistor-array adjacent to U201 Pin9497100 on the main

- 19 - D. If the above actions do not work, then check U201Pin94, Pin97, and Pin102-104 to see if there is any cold or hollow soldering and short ci

- 20 - problem. B. If the above actions are not working, replace the Main Board.  T31Audio /left channel (AOL) no sound or abnormal sound  Main

- 21 - B. Check U401U402U403 and J501J502 to see if there is any cold or hollow soldering and rule out the problem. C. If the above action does

- 22 -  Main Board A. Check U201 to see if there is any cold or hollow soldering and reverse soldering of IC or parts missing. B. If the above ac

- 23 - A. Measure the voltages of PIC, GM2, GM0, RGB, SBR, SBB, TIN and CNT to see if they are correct. B. Check VR311 to see if there is any cold

- 24 - soldering and reverse soldering of IC or parts missing. F. Check Pin 1 to Pin 16 on U301 for any cold or hollow soldering and reverse solderi

Revision Record Date Rev No Section Description 15/ Mar./ 2004 0.1 New edition 30/ Mar./ 2004 0.2 Add chapter 7 3/ Sep./ 2004 1.

111 GGGeeennneeerrraaalll DDDeeessscccrrriiippptttiiiooonnnsss...

- 1 - 1 General Descriptions 1.1 Model Features  Video: DVD Playback, Kodak picture CD compatible & JPEG readable  Audio: CD, CD-R, CD-RW, MP

- 2 - 1.2 Information Disk Format DVD, VCD, CD, MP3, CD-R, CD-RW, DVD-AUDIO (OPTION), WMA (OPTION) Video System NTSC / PAL Video Decompression M

- 3 - 2 Electrical Characteristics 2.1 Optical Characteristics Parameter Specifications Unit Screen Size 7.0 (16:9 diagonal) inch Display Format

- 4 - 2.3 System Block Diagram /RESETSPDIF+ADAC_SDA/SCSA/V INPUT<Value>CVBSRLAV-SWSBADSRVMPOWERPOWER/RESET/uPRSTMVREF+12V+5V+3.3V+1.8V/WRMA[0..

- 5 - 3 Power 3.1 Power Supply  Input voltage: Normal voltage: 100 to 240 Vac. Variation range: 90 to 264 Vac.  Input frequency: Normal frequency